How to Get Mold Out of the Carpet- Carpet Mold Removal Complete Guide
Mold on the carpet affects the carpet and is also dangerous for human health if not appropriately dedicated. Also, carpet mold can be difficult to remove for many reasons, including the carpet design and the rear of damaging the carpet quality if you wash with chemicals or other substances. Don’t worry, here we have mentioned some easy methods on how to get mold out of the carpet.
Mold can be green, gray, or white. It can occur in corners, walls, toilets, and most probably in carpets. However, if the mold occurs on the walls, it is not much tedious to remove. They can be removed by little scratching or by using a steam mop on high mode.
On the other hand what if the mold occurs in carpet or rugs? Then it’s a problem. It requires a deep clean with professional techniques. It’s because mold has a very small size and reaches deep down in the carpets.
However, removing mold from carpeting. First of all, we need to understand certain things about mold like how it grows and why it is highly dangerous. Later, we are better able to remove mold from carpeting.
⚡ Dangers a mold can cause
Mold doesn’t only look bad. Mold particles have a very small size and reach everywhere especially in a damp area and cause several problems mold can cause. Some of which are given below:
? Why Mold Grows in Carpet?
Do you know why mold grows in washrooms or in damp spaces? That’s because mold is a kind of fungus and thrives on moisture, so all the places that are in direct contact with water and rarely cleaned tend to have a higher probability of mold.
If you have a carpet that is a natural water absorber, it will absorb water when it comes in contact with leakage or you clean it, but it doesn’t get dried properly. If this carpet stays wet for more than two or three days it will develop mold.
Moreover, when your carpet develops a mold, it will produce an awful smell as well and it will soon be visible as well as destroy the carpet. Let’s talk about how to get mold out of the carpet. It’s a little tedious procedure.
Read Also: Best Vacuum for Long Hair Review
? Precautionary Measures
When removing mold, precautionary measures must be taken before beginning the process. Here are the precautions you must follow:
- If possible cut all the area of your house from the area attacked by mold.
- Wear gloves because you are going to use harsh chemicals.
- Make yourself protected with the mask. Otherwise, mold particles can get into your lungs.
- Use safety goggles because mold can irritate your eyes.
Also, read how to get mildew out of carpets to make them cleaner.
? Steps to Remove Mold from Carpet
It’s time now to discuss how to get mold out of your carpet. Follow these steps properly and learn how to clean mold off the carpet.
Open the window and turn on the fans
Since mold develops because of moisture, so let the window open. The exchange of fresh air with moist air would remove moisture. In case you don’t have a window, then use a ceiling fan or a dehumidifier.
Use of brush
For the preliminary stage use a hard scrub brush on the area where the mold is visible. Scrub it on mold and the initial layer of mold will be removed. Collect all the particles of mold in a bag and through them.
Sprinkle the Baking Soda
Baking soda is the best and quickest way to get rid of mold in carpets. Sprinkle baking soda directly on the carpet. But in some situations, mold is more incomprehensible to deal with than you can mix a vinegar-baking soda solution and sprinkle it directly on the carpet.
Leave it overnight so the solution can reach the fibers deeply. This solution will also remove the odor caused by mold.
Use of vacuum or steam mop
One of the most important steps is the use of a vacuum. Make sure they have a HEPA filtration system before using either one of them. Vacuum the entire area in a back and forth position and mold spores will vanish. Vacuuming is the easiest and most common way to remove mold from carpets.
On the other hand, if you are using a steam mop then continuous steam for 10-15 seconds on the high mode will quickly take the mold off. Always clean the filters before using the vacuum again as they have accumulated mold spores.
You can use Best Vacuums for Shag Carpets or Lightweight Vacuum Cleaner for the Elderly.
Inspecting the area
You should inspect the area to check if you have removed all the mold completely. In the end, you should open the window or turn on the fan to remove any mold spores remaining in the air.
Hence, these are some easiest ways on how to get rid of mold on carpet. Follow these and make your carpet as clean as it’s new.
✔️ Wrapping Up How to Get Mold Out of the Carpet
Mold is difficult to clean so try to keep carpet away from leakage and use a dehumidifier to avoid moisture. Further, if your carpet has developed a mold in a large area most probably it will need professional cleaning.
Make sure to dry the carpet quickly after cleaning. The preferred methods are using a brush or baking soda for quick cleaning. Some other methods are recommended and take time. Also, make sure to quickly dry the carpets after cleaning.