How To Take The Bottom Of A Shark Lift-Away Vacuum

Are you tired of your shark lift-away vacuum leaving debris behind? It’s time to dive in and clean the brush roll and remove any clogs that may be causing the issue. But before you can do that, you need to learn how to take the bottom off your shark lift-away vacuum.

Don’t worry, it’s not as scary as swimming with a shark.

First, gather your tools. You’ll need a screwdriver and a pair of scissors to cut away any hair or fibers that may be tangled in the brush roll.

Once you have your tools, it’s time to prepare the vacuum. Unplug it and make sure it’s turned off before proceeding.

Now, let’s get started on removing the bottom plate.

Gather Your Tools

You’re going to need some tools to get this done, so make sure you’ve got everything you need before diving in. Don’t get caught halfway through without the right gear!

Here are some of the tools you’ll need to take the bottom of your Shark Lift-Away vacuum: a Phillips screwdriver, a flathead screwdriver, and a pair of pliers.

It’s important to have these tools on hand because regular cleaning and maintenance is essential to keep your vacuum running smoothly.

Regular cleaning and maintenance are crucial to keep your Shark Lift-Away vacuum functioning at its best.

The bottom of the vacuum can collect a lot of dirt and debris, which can cause the vacuum to lose suction power and become less effective.

By taking the bottom off and cleaning it thoroughly, you’ll be able to remove any dirt or debris that has accumulated and keep your vacuum running smoothly.

So, before you start, make sure you have the right tools and remember the importance of regular cleaning and maintenance.

Prepare the Vacuum

Before diving into the cleaning process, it’s important to properly prepare your powerful cleaning tool.

Start by inspecting the filters to ensure they’re clean and free of any debris. If they’re dirty, take them out and wash them with soap and water.

Be sure to let them dry completely before inserting them back into the vacuum. This will ensure that your vacuum is running at its full potential and picking up as much dirt and dust as possible.

Next, lubricate any moving parts to keep them running smoothly. Check the brush roll and make sure it’s free of any hair or debris. You can use a pair of scissors to cut off any tangled hair.

Once it’s clean, apply a small amount of lubricant to the brush roll and the area where it connects to the vacuum. This will help it rotate more easily and prevent any damage to the vacuum.

With these simple steps, you can ensure that your Shark Lift-Away vacuum is working at its best and ready to tackle any mess you throw its way.

Remove the Bottom Plate

To get started, let’s remove the plate at the base of the cleaning head, revealing the brush roll and other components that may need attention.

This is an important step in vacuum maintenance, as it allows you to clean and maintain the brush roll, remove any blockages, and replace the belt if necessary.

Here are the steps to remove the bottom plate of your Shark Lift-Away vacuum:

  1. Turn off and unplug the vacuum before starting any maintenance or cleaning tasks.
  2. Lay the vacuum on its side, with the brush roll facing upward.
  3. Locate the two tabs on either side of the bottom plate. Press down on these tabs and lift the plate off.

By following these cleaning tips, you can ensure that your Shark Lift-Away vacuum performs at its best.

Don’t forget to clean the brush roll and check for blockages regularly to maintain the suction power and prolong the life of your vacuum.

Clean the Brush Roll and Remove Clogs

To begin cleaning your Shark Lift-Away vacuum, the first thing you need to do is remove any hair or debris from the brush roll.

You can do this by flipping the vacuum over and using your fingers or a pair of scissors to cut away any tangled hair or debris.

Next, check for clogs in the hose or other areas of the vacuum, such as the dustbin or filter. If you do find a clog, use a long object such as a broomstick or coat hanger to remove it.

Remove any hair or debris from the brush roll

Make sure to clean out any hair or debris from the brush roll before continuing with the bottom removal process of your Shark Lift-Away vacuum.

The brush roll maintenance is crucial to ensure the vacuum’s optimal performance and prevent any potential damage.

  • To do this, first, switch off the machine and unplug it from the power source.
  • Then, remove the brush roll cover and carefully clear any hair or debris tangled around the brush roll.
  • You can use a pair of scissors or tweezers to remove any stubborn strands of hair.
  • Once you finish, reassemble the brush roll cover and continue with the next step.

Regular brush roll maintenance is vital to keep your Shark Lift-Away vacuum running efficiently and prevent future clogs.

The brush roll’s job is to pick up dirt and debris on your floors, so it is prone to get clogged with hair, fibers, and other small particles.

If you notice that your vacuum is not picking up as much dirt as it usually does, it might be time to clean the brush roll.

You should aim to clean it at least once a month or more frequently if you have long-haired pets or carpets.

Remember, keeping your Shark Lift-Away vacuum’s brush roll clean and free of debris is an essential step in maintaining its performance and longevity.

Check for clogs in the hose or other areas of the vacuum

Before the dirt and debris can be whisked away, it’s important to inspect the hose and every nook and cranny of your trusty vacuum to ensure there are no pesky clogs obstructing the cleaning process.

Hose maintenance is a crucial step in keeping your Shark Lift-Away Vacuum running smoothly. First, detach the hose from the main body of the vacuum and visually inspect it for any blockages.

If you notice any debris or dust buildup, use a long object such as a coat hanger or broomstick to remove it.

If you’re still experiencing suction issues, it’s time to move on to troubleshooting tips. Check other areas of the vacuum, such as the canister and filters, to make sure they’re not clogged as well.

The brush roll should also be free of any tangled hair or debris.

Once you’ve done a thorough inspection and removed any obstructions, you should notice a significant improvement in your vacuum’s performance.

With these simple steps, your Shark Lift-Away Vacuum will be back to its powerful cleaning capabilities in no time.

Use a long object such as a broomstick or coat hanger to remove clogs

Using a lengthy object like a broomstick or coat hanger can effectively clear any obstructions from the hose or other areas of your cleaning machine.

First, unplug your shark lift-away vacuum and detach the hose from the vacuum body. Then, use the object to gently poke through any clogs or debris that may be blocking the passage of dirt and dust.

Be careful not to damage the inside of the hose or vacuum body with the object, as this could cause further problems.

Alternative methods for removing clogs include using compressed air or a vacuum cleaner attachment specifically designed for removing blockages.

To prevent clogs from occurring in the first place, make sure to regularly empty the dustbin and clean the filters.

Also, be cautious when vacuuming up larger debris or objects that could potentially get stuck in the hose or vacuum body.

By taking these preventative measures and using the right tools, you can keep your shark lift-away vacuum running smoothly and efficiently.

Re-assemble the Vacuum

Now that everything’s disassembled, it’s time to put your shark vacuum back together and get it ready for the next cleaning session. Here are some tips to help you re-assemble your shark lift-away vacuum with ease:

  • Make sure all parts are clean and free of debris before re-assembly.
  • Follow the instructions in your owner’s manual to ensure all parts are in the correct position.
  • Check all connections to make sure they’re secure and properly fastened.
  • Test the vacuum to ensure it’s working properly before storing it away.

If you encounter any issues during the re-assembly process, don’t panic. Troubleshooting common issues can save you time and money in the long run.

Some common issues to look out for include:

  • Clogs or blockages in the hose or brush roll. Use a long object such as a broomstick or coat hanger to remove clogs.
  • A dirty filter. Clean or replace the filter according to the manufacturer’s instructions.
  • A broken or damaged part. Contact the manufacturer or a certified repair technician for replacement or repair options.
  • A loss of suction power. Check for clogs, clean or replace the filter, and ensure all connections are secure before seeking further assistance.

By following these tips and troubleshooting common issues, you can ensure your shark lift-away vacuum is in top working condition and ready for your next cleaning session.


Congratulations, you’ve successfully learned how to take the bottom of your Shark Lift-Away Vacuum! Now that you know the steps, cleaning your vacuum will be a breeze.

But have you ever wondered why it’s important to clean your vacuum’s brush roll and remove clogs?

Some people believe that a dirty vacuum can actually make your home’s air quality worse. While this theory is still being investigated, it’s always a good idea to maintain your vacuum to ensure it’s functioning properly.

Plus, a clean vacuum means a cleaner home! Keep up the good work and enjoy your freshly cleaned floors.