How to Use a Pool Vacuum- A Detailed Guide on Cleaning Pool

Using a pool vacuum aims to clean the vacuum and free it from bacteria, viruses, and other chemicals. However, it’s not easy to use and make it clear. People get confused when they try to use it, especially those who will use it for the first time. So, down in this post, we provided a complete way to use a pool vacuum.

There are two ways of using a pool vacuum and making your pool clear and free of bacteria. These include manual ones and automatic ones. In this article, we mentioned the manual process, which is good and recommended for removing algae, fungi, and coliform bacteria in pool water.

Let’s now learn the method to clean the pool without waiting for more.

Steps to Use Pool Vacuum

Here are some important steps to clean your pool manually. Follow the step-by-step process to learn to clean the pool easily.

1. Attach Vacuum Head to Telescope Pole

The first and most crucial step is to attach the vacuum head to the telescoping pole very carefully such that there is not much flexibility between these two elements.

Don’t worry about where to attach the vacuum as there is a specific place at every pool attached to the top of the vacuum or at one side of the vacuum.

In this way, the vacuum head moves at the end of the vacuum, where pressure helps remove debris and other large particles of mud or sand from the pool.

2. Attach the Hose to the Vacuum Head

Now the next step is attaching the vacuum hose to the vacuum head again. A vacuum hose is not tough to attach to the vacuum head as there is a specific swivel at one end of a vacuum hose.

A hose clamp is another essential part due to which it’s easy to attach a hose to the vacuum head and make this fit during the overall procedure.

Now push down the head, hose, and telescope pole into the pool floor. The vacuum head must be low than the telescope and hose.

Locate the water filter skimmer in the pool walls and the other ends of the skimmer into the hose end.

3. Removing Air Buds from Water

Removing air bubbles from water is also called a priming pool vacuum. This is an easy step but requires some attention. So, don’t do this while you are busy with another task.

You can perform it by pushing the vacuum hose from the end, which is against the suction head of the vacuum. It also helps to create suction which adds easiness to the next step.

4. Seal in the Suction

Before going to the further step keep in mind to seal out the suction you made in the previous step. Also, make sure that the vacuum plate is connected to the hose.

After the suction is set, turn off all the openings from the suction to block the waterway from the inlet and outlet source in the pool.

5. Vacuuming up the Pool

This is an important and last step in using a pool vacuum. Set the filter nozzle so that it catches all the remaining debris and substance from the pool water.

This step requires some time. So, start it by the water floor and then gradually move towards the upper level of moisture.

You can move the setting and filter so that all debris from all sides is removed way slowly. Us this step again and again until all the particles are removed from the water and clear water reaches the pool.

What to Do Next?

After doing the above procedure, remove the vacuum head from the telescoping hose and all other things from their place.

Clear the whole pool once with high water pressure to remove dirty water and clear water that remains in the pool.

Don’t Like to Use Pool Vacuum Manually? Here are some Alternate Ways

Although the above is an authentic and recommended way to clear your vacuum. Yet still, if you don’t like to follow this method, you can try these alternative ways.

6. Robotic Pool Cleaners

Robotic pool clears those vacuum filters which work like manual ones. These cleaners remove all debris and harmful substances from water once you plug these into an electric switch. Here are some cleaners which are top-rated and are recommended by professionals:

7. Pressure Side Pool Cleaners

These cleaners work on the exact procedure but use water pressure to work and clean your pool.

These are self-sustained pool cleaners and take less time than all other manual and automatic cleaners.

8. Suction Side Cleaner

It’s another type of pool cleaner that works well with a water filter based on the suction side. It is more expensive than both of the above cleaners to buy and implement.

We don’t recommend using this because of its low performance.  

Frequently Asked Questions

What is a pool filter?

A pool filter is an essential type of water filter that helps to remove all harmful substances from the pool water and is designed to use in the pool.

This filter is different than the standard and regular water filters and is extensive. There are a lot of filter brands available in the market at different rates and designs.

However, we recommend using Pool Flocculant Water Clarifier based on its elegant design.

How much does it cost to vacuum pooling?

There are a lot of factors on which it depends, including your pool size and water quality. However, in estimation, it may cost about $500 maximum cost.

What should be the maximum frequency of using a pool vacuum?

It should be once a week, and if you are unable to implement it, then using a pool vacuum twice a week is recommended.

Final Verdict

So, above is a procedure about how to use a pool vacuum manually at home anytime. This is a recommended procedure that people love to learn and implement in daily life.

Furthermore, it works for a long time, and you remain free of cleaning your pool regularly. You can also check our other reviews and blogs for ensuring a clean and clear environment.