How To Vacuum Pool With Intex Sand Filter

How To Vacuum Pool With Intex Sand Filter?

Are you tired of swimming in a dirty pool? Do you want to know how to effectively clean your pool using an Intex sand filter? Look no further!

In this article, we will guide you through the process of vacuuming your pool with an Intex sand filter.

First, it’s important to understand why you need to vacuum your pool. Even with regular maintenance, debris such as dirt, leaves, and insects can accumulate in your pool over time. This can not only make your pool look unappealing, but it can also affect the health and safety of those swimming in it.

Vacuuming your pool with an Intex sand filter will help remove these unwanted particles and ensure that your pool is clean and safe for swimming. So, let’s get started!

Understand Why You Need to Vacuum Your Pool

You’re probably feeling frustrated with the never-ending cycle of algae growth and cloudy water, but don’t worry, understanding the importance of keeping your pool clean will motivate you to take action.

Regular pool maintenance is crucial to ensure that your pool is safe, clean, and enjoyable to swim in.

Neglecting your pool can lead to a buildup of bacteria, algae, and debris, which can cause health problems and damage your pool equipment.

The benefits of having a clean pool are numerous. A clean pool not only looks better but also provides a healthier and safer swimming environment.

A well-maintained pool can also help to extend the life of your pool equipment, saving you money in the long run.

Additionally, a clean pool is more enjoyable to swim in, and it can enhance the overall experience of spending time outdoors with family and friends.

Gather Necessary Equipment

To vacuum your pool using an Intex sand filter, you’ll need a few essential tools.

First, make sure you have a vacuum hose that fits your pool’s size and shape.

You’ll also need a telescopic pole to attach the vacuum head to, as well as the vacuum head itself.

With these tools in hand, you’ll be one step closer to a clean and clear pool.

Intex Sand Filter

When using it, you’ll notice that the Intex sand filter has a compact design and is easy to install in your pool area.

It comes with a built-in timer and six functions, including backwash, rinse, and filter. The sand filter is also equipped with a pressure gauge that indicates when it’s time for a backwash.

You’ll need to replace the sand every five years or so, depending on usage and the quality of your pool water. To ensure that your Intex sand filter runs efficiently, it’s important to perform regular maintenance.

This includes backwashing the filter every one to two weeks, depending on usage, and cleaning the skimmer basket and pump strainer regularly.

If you encounter any issues with your sand filter, such as low pressure or leaks, refer to the troubleshooting section in your user manual or contact Intex customer service for assistance.

With proper maintenance and troubleshooting, your Intex sand filter will keep your pool water clean and clear for years to come.

Vacuum Hose

Maintaining a clean and clear swimming pool can feel like a never-ending battle, especially when debris and dirt are like pesky weeds that keep popping up no matter how many times you try to pull them out.

One effective way to keep your pool sparkling clean is by using a vacuum hose. Different types of vacuum hoses are available in the market, but the most common ones are flexible, durable, and easy to use.

To maintain your vacuum hose, it is essential to clean it after each use and store it in a dry place. Replace any damaged or worn-out parts of the hose to ensure maximum suction power and efficiency.

To make it easier for you to choose the right vacuum hose for your Intex sand filter, check out this table:

Type of Vacuum HoseFeaturesPros
Standard Vacuum HoseMade of PVC material, lightweight, and flexibleAffordable, easy to store, and use
Heavy-duty Vacuum HoseMade of durable and thicker material, crush-resistant, and UV-resistantLonger lifespan, excellent suction power, and resistance to harsh weather conditions
Automatic Pool Cleaner HoseDesigned for use with automatic pool cleaners, flexible, and easy to maneuverSaves time and effort, effective in cleaning hard-to-reach areas, and eliminates the need for manual cleaning

Choose a vacuum hose that suits your needs, and maintain and replace its parts regularly to keep your pool clean and healthy for swimming.

Telescopic Pole

Using a telescopic pole can be a fun and efficient way to reach and clean every corner of your swimming area. When it comes to choosing the right material, aluminum, and fiberglass are the most popular options.

Aluminum is lightweight and affordable, while fiberglass is a bit more expensive but offers more durability and sturdiness. Consider your budget and cleaning needs before making a decision.

Once you have your telescopic pole, adjusting its length is crucial for effective cleaning. Most poles come with adjustable locking mechanisms that allow you to extend or shorten the length as needed.

Make sure to adjust the pole to a comfortable length that allows you to reach the farthest corners of your pool without straining your arm or back. With the right telescopic pole, cleaning your pool will be a breeze.

Vacuum Head

You’ll want to attach the vacuum head to the end of your telescopic pole so that you can effortlessly glide along the bottom of the water and clean up any pesky debris.

When choosing a vacuum head, there are a few tips to keep in mind.

Firstly, consider the size of your pool. If you have a large pool, you’ll want to choose a vacuum head with a wider cleaning path to make cleaning quicker and easier.

Secondly, think about the type of debris you’ll be cleaning up. If you have a lot of fine particles, such as sand or dirt, you’ll want a vacuum head with a finer mesh bag to catch those particles.

Lastly, if you experience any common issues with your vacuum head, there are a few troubleshooting tips to keep in mind.

  • If your vacuum head is not picking up debris, check to make sure the suction is strong enough. You can do this by placing your hand over the end of the telescopic pole and feeling for suction.
  • If the suction is weak, try adjusting the valve on your sand filter to increase the flow of water.
  • Additionally, make sure the vacuum head is properly attached to the telescopic pole and that there are no leaks in the hoses.

With these tips in mind, you’ll be able to effectively clean your pool with your Intex sand filter and vacuum head.

Connect Equipment to Your Pool

To attach the vacuum hose, first, make sure the end of the hose is submerged in the water.

Then, attach the hose to the intake nozzle located on the side of the sand filter.

Next, connect the telescopic pole to the vacuum head by sliding the pole’s attachment collar into the head’s handle.

Finally, attach the vacuum head to the free end of the hose and you’re ready to start cleaning your pool.

Attaching the Vacuum Hose

Now it’s time to connect the hose and get this cleaning process started. Attaching the vacuum hose to the Intex sand filter is a fairly straightforward process. Here are the steps you need to follow:

  • First, make sure that your sand filter’s multiport valve is set to ‘Filter.’ This will ensure that water will flow through the filter and keep it clean.

  • Next, locate the vacuum port on your pool’s skimmer. It should be located on the side or bottom of the skimmer.

  • Attach the vacuum hose to the vacuum port on the skimmer. Make sure that the hose is securely attached and that there are no leaks.

Different vacuum types may require different methods of attachment, so be sure to check your specific vacuum’s instructions for more information.

If you encounter any issues while attaching the hose, here are a few troubleshooting tips:

  • Check to make sure that your sand filter’s multiport valve is set to ‘Filter.’

  • Make sure that your pool’s skimmer is free of debris and is functioning properly.

  • If the vacuum hose is not attaching securely, try applying a lubricant to the skimmer port or the hose itself.

With your vacuum hose properly attached, you’re ready to move on to the next step in the cleaning process.

Connecting the Telescopic Pole

Once the hose is securely attached, it’s time to connect the telescopic pole to continue the cleaning process.

To do this, locate the pole and insert it into the hole on the vacuum head. Make sure it clicks into place to ensure a secure connection.

Then, extend the pole to the desired length and tighten the locking mechanism.

Proper storage and maintenance tips for the telescopic pole include rinsing it off with clean water after each use and storing it in a dry, shaded area to prevent damage from the sun’s UV rays.

If you’re in need of a new telescopic pole, there are alternative options available such as aluminum or fiberglass poles.

The pros of an aluminum pole are that it’s lightweight and easy to handle, while the cons are that it can bend or break easily if not handled carefully.

On the other hand, fiberglass poles are more durable and can handle more weight, but they’re heavier and can be more difficult to maneuver.

Attaching the Vacuum Head

Before you begin cleaning, attach the head of the hose to the telescopic pole by clicking it into place and extending it to the desired length.

There are different vacuum head options available in the market, so choose one that suits your pool’s needs.

Vacuum head maintenance is crucial to ensure that it functions properly and lasts longer. Always clean the vacuum head after use, and check for any damage or wear and tear that may require repairs or replacements.

To attach the vacuum head, first, remove the skimmer basket and place the vacuum head over the suction port. Secure it in place by tightening the hose clamp.

Make sure the vacuum hose is attached to the vacuum head and the other end is connected to the skimmer.

Turn on the pump and let it run for a few minutes to allow the vacuum head to settle on the bottom of the pool. Slowly move the vacuum head back and forth, covering the entire pool floor.

Once you have cleaned the entire pool, turn off the pump and disconnect the vacuum hose.

Vacuum Your Pool

To vacuum your pool with an Intex sand filter, start by turning on the pump.

Connect the vacuum head to the telescopic pole and slowly move it across the bottom of the pool, using a back-and-forth motion to ensure you cover the entire area.

Don’t forget to clean the filter after vacuuming to keep your pool sparkling clean.

Turning on the Pump

You’re almost ready to dive in! Now flip the switch to turn on your powerful filtration system and let’s get this party started.

When turning on the pump, make sure that the pump basket is clean and free of any debris. This will ensure that your pump is working efficiently and will prevent any damage to the system.

In addition, it’s important to regularly perform pump maintenance and keep an eye out for any potential issues.

Troubleshooting tips include checking for clogs in the system, ensuring that the water level is high enough, and checking for any leaks.

By staying on top of pump maintenance and troubleshooting any issues, you can keep your pool crystal clear and ready for use all summer long.

Slowly Moving the Vacuum Head

As you ease the head of the hose along the bottom of the water, the dirt and debris will be swept away like a broom on a dusty floor.

Vacuuming techniques require a slow and steady pace to ensure that all the dirt is removed from your pool.

Be sure to move the vacuum head in a straight line, starting from one end of the pool and working your way to the other. This will help you cover the entire pool.

Dealing with obstacles can be tricky, but don’t worry, it’s not impossible. If you come across a large obstacle like a pool ladder or a swimmer’s toy, gently move the vacuum head around it.

Avoid harsh movements or you may cause damage to the vacuum head or the obstacle itself.

If you encounter a small obstacle like leaves or twigs, the vacuum head should suck them up with ease. Just make sure to keep an eye on the filter and empty it regularly to prevent any clogging.

With patience and a steady hand, you can easily vacuum your pool and keep it crystal clear all season long.

Cleaning the Filter

Cleaning the filter is an essential part of maintaining a healthy and hygienic swimming environment. Without proper cleaning efficiency, the filter can become clogged and cause the circulation of dirty water.

To ensure that your Intex sand filter is working at its best, there are a few things that you can do to clean it.

  • First, turn off the pump and unplug it.
  • Then, remove the filter tank and rinse it with a hose, making sure to remove any debris that may be stuck inside.
  • Finally, use a filter cleaner or a mild detergent to clean the inside of the tank, making sure to rinse it thoroughly before reassembling it.

It is recommended to clean the filter at least once a week, or more frequently if the pool is used heavily. By maintaining your filter, you can ensure that your pool remains clean and safe for swimming.

Maintain Your Intex Sand Filter

To maintain your Intex sand filter, it’s important to regularly backwash the filter according to the manufacturer’s instructions. This will help keep the filter working efficiently and prevent clogs.

Additionally, be sure to replace sand and parts when needed to ensure the filter is functioning properly.

Finally, when you’re done using the filter, make sure to properly store the equipment to protect it from damage and prolong its lifespan.

Regularly Backwashing the Filter

Give your filter a good flush by reversing the flow and sending all the gunk packing!

Backwashing is the process of reversing the flow of water through the filter, dislodging, and flushing out any debris that has accumulated in the sand bed. It is a crucial step in maintaining the efficiency and longevity of your Intex sand filter.

The frequency of backwashing depends on the size of your pool and the amount of debris in the water, but a good rule of thumb is to do it once a week during peak swimming season.

Keep an eye out for signs of a clogged filter, such as slow water flow or high-pressure levels on the gauge.

If you notice these symptoms, it may be time to backwash the filter more frequently or even replace the sand altogether.

The good news is that backwashing is a simple process that only takes a few minutes. Just turn off the pump, set the valve to ‘backwash,’ and let the water run for a few minutes until it runs clear.

Then, set the valve to ‘rinse’ and run the water for another minute to settle the sand back into place before returning to the normal ‘filter’ mode.

With regular backwashing, your Intex sand filter will keep your pool sparkling clean and ready for fun all season long!

Replacing Sand and Parts When Needed

Sometimes, even with regular maintenance, you may need to replace certain parts or components of your pool’s filtration system to keep it running smoothly and efficiently.

When it comes to sand filter maintenance, one common issue that may require replacement is the sand itself. Over time, the sand in your filter can become worn down and lose its effectiveness at trapping debris and contaminants.

If you notice that your pool water is not as clean as it should be, or if your filter pressure is consistently high even after backwashing, it may be time to replace the sand.

  • To replace the sand in your Intex sand filter, start by turning off the pump and disconnecting the hoses.
  • Next, remove the filter tank and carefully dump out the old sand.
  • Clean the tank thoroughly with a hose or pressure washer, and inspect the laterals and other parts for any signs of damage or wear.
  • Replace any damaged parts as needed before adding the new sand.

Be sure to follow the manufacturer’s instructions for the correct amount of sand to use, and be careful not to overfill the tank.

Once the sand is in place, reassemble the filter and hoses, and turn the pump back on. Your filter should now be running smoothly and efficiently, keeping your pool water clean and clear.

Properly Storing the Equipment After Use

As you bid farewell to another day of pool maintenance, don’t forget to take care of your trusty filtration friend by storing it properly, keeping it safe and snug until its next call of duty.

Properly storing equipment is just as important as maintaining it. Here are some maintenance tips to keep in mind when storing your Intex sand filter:

  1. Clean the filter thoroughly before storing it. A dirty filter can lead to bacteria growth and clogged pipes. Rinse the filter with a hose and let it dry completely before putting it away.

  2. Disconnect the hoses and drain any remaining water from them. This will prevent mold and mildew growth, which can cause unpleasant odors and damage the hoses over time.

  3. Store the filter in a dry, cool place. Avoid exposing it to direct sunlight or extreme temperatures, which can damage the filter tank and other parts. A storage shed or garage is an ideal location for the filter.

By following these simple tips, you can extend the life of your Intex sand filter and ensure that it is in good condition when it’s time to use it again.

Keep in mind that proper storage is just as important as proper use and maintenance.


Congratulations! You’ve successfully learned how to vacuum your pool with your Intex sand filter. Now, you’re a pool cleaning master!

With your newly acquired skill, you’ll be able to show off your crystal clear pool to all your friends and family. No more slimy pool floors or cloudy water, just pristine blue water ready for a refreshing swim.

You’ll be the envy of the neighborhood and the talk of the town. So, get ready to enjoy your pool like never before and impress everyone with your new pool cleaning knowledge.

Happy swimming!