Why Is My Dirt Devil Vacuum Not Picking Up

Why Is My Dirt Devil Vacuum Not Picking Up?

Are you frustrated with your Dirt Devil vacuum’s inability to pick up dirt and debris? Don’t worry, I’m here to help. Many Dirt Devil owners encounter this issue at some point.

Fortunately, there are several reasons why your vacuum may not be picking up properly, and most of them are easy to fix. The first step in solving the problem is to identify the root cause. It could be anything from a clogged brush roll to a malfunctioning motor.

By following the troubleshooting steps in this article, you’ll be able to determine the cause and take the necessary steps to get your Dirt Devil working like new again.

So, let’s get started!

Check the Brush Roll

You’ll want to take a closer look at the brush roll to see if any debris or hair is tangled around it, preventing it from spinning properly and picking up dirt and dust from your floors.

Brush roll maintenance is an important part of keeping your vacuum functioning properly. Over time, hair, fibers, and other debris can become tangled around the brush roll, causing it to slow down or even stop spinning altogether.

Common issues with the brush roll include tangled hair, worn or broken bristles, and debris buildup.

To address these issues, start by turning off your vacuum and unplugging it from the wall. Then, use a pair of scissors or a brush to carefully remove any hair or debris from around the brush roll.

If the bristles are worn or broken, you may need to replace the brush roll entirely.

By taking care of your brush roll, you can ensure that your vacuum continues to pick up dirt and dust effectively.

Clean or Replace Filters

If your vacuum seems to be struggling and the airflow seems weak, it might be time to give the filters a good scrub or swap them out for fresh ones.

Maintaining filters is an important part of keeping your vacuum in top shape. Clogged or dirty filters can significantly reduce the suction power of your vacuum, making it harder to pick up dirt and debris.

Here are 4 easy steps to clean or replace your vacuum filters:

  1. Locate the filters on your vacuum. They’re usually located near the dustbin or behind the brush roll.
  2. If the filters are washable, gently remove them from the vacuum and rinse them under running water.
  3. Allow the filters to dry completely before putting them back in the vacuum.
  4. If the filters are not washable or are damaged, replace them with new ones.

By following these simple steps, you can improve the suction power of your vacuum and keep it running smoothly.

Don’t forget to clean or replace your filters regularly to maintain optimal performance.

Inspect the Hose

Take a closer look at the hose of your machine to ensure that it is free from any clogs or damage that might be interfering with the suction power.

The hose is one of the most important components of your vacuum cleaner. If it is damaged or clogged, it can prevent the machine from picking up dirt and debris effectively.

Make Sure That Hose Is Properly Attached To The Vacuum Cleaner

To check the hose, first, make sure that it is properly attached to the vacuum cleaner. Then, look inside the hose and check for blockage.

You can use a long stick or a coat hanger to remove any debris that might be stuck inside.

Inspect Hose For Any Damage

If you find that there is no blockage in the hose, inspect it for any damage. Check for any cracks, tears, or holes that might be causing air leaks.

If you find any damage, it is important to replace the hose as soon as possible.

A damaged hose can cause a decrease in suction power and can result in your vacuum cleaner not picking up dirt and debris effectively.

Common Hose ProblemsCausesSolutions
ClogsDirt and debrisRemove blockage using a long stick or coat hanger
DamageCracks, tears, holesReplace the hose as soon as possible

Using the table above can help you quickly determine the cause of the problem and the solution to fix it.

By inspecting the hose, you can ensure that your vacuum cleaner is working efficiently and effectively.

Troubleshoot the Motor

It’s important to troubleshoot the motor if your machine is experiencing a decrease in suction power.

The motor is the heart of your vacuum cleaner, and any issues with it can cause various problems, including reduced suction power.

Check For Any Unusual Noises Or Vibrations

Check if the motor is working correctly by turning it on and checking for any unusual noises or vibrations.

If you notice any of these, it might be time to replace the motor. However, before you do that, make sure to inspect the brushes and belts to ensure they’re not causing the problem.

Seek Professional Help

If the motor seems to be working fine, but you’re still experiencing reduced suction power, it might be time to seek professional help.

A professional technician will be able to diagnose the issue accurately and provide you with the best solution.

In some cases, it might be a simple fix, like cleaning or replacing the filter. However, if the motor is faulty, it might be best to replace it altogether.

Remember that trying to fix the motor yourself can be dangerous, so it’s always best to seek help from a professional.


So, if your Dirt Devil vacuum isn’t picking up, don’t despair! You can easily troubleshoot the issue and get it working again.

Remember to check the brush roll, clean or replace filters, and inspect the hose. These are the most common causes of suction problems.

If these steps don’t solve the issue, you may need to troubleshoot the motor. Don’t be afraid to take your vacuum to a professional if you’re unsure how to do this.

Remember, a clean home is a happy home, and with a little effort, your Dirt Devil vacuum will be back to sucking up dirt and debris like a champ in no time.

As they say, “Where there’s a will, there’s a way”. Happy cleaning!